With the continuous innovation of wood pallet, the new glued wood pallet is also gradually suitable for a variety of field environment, long-term field use is not easy to appear aging and deformation. Wooden pallets are made of natural wood and are widely used to load, stack, transport and transport goods and products per unit load. They are mainly made of poplar, miscellaneous wood, pine and other wood. Wooden pallets can be classified according to the insertion form of forklift, including one-way insertion type, two-way insertion type and four-way insertion type, Next, we will give a detailed description of the load-bearing capacity of the wooden plank.

The load-bearing capacity of wooden trestle is bound to be affected due to its different environment. When the wooden plank is placed on a hard plane and the average weight of the object is placed on the board, the ultimate weight that the wooden plank can bear is called static load. When the object is placed on the board averagely, the maximum weight that can be accepted when the wooden plank is in motion is called dynamic load for short.

The load-bearing range of the wooden plank is the load in the industry term. The load of the wooden plank is not an accurate data we imagine, but several data or a digital range. The load-bearing capacity of the wooden plank is affected by other factors, and its load-bearing capacity is different, depending on the details. Therefore, the industry does not have a detailed way to test the load-bearing of wooden pallets.

Another case is that the object is placed on the wooden trestle evenly. When the wooden trestle is overhead on the crossbeam frame or other similar frames, the maximum weight that can be accepted is called the load on the frame. In the construction of storage on the wooden pallet, the load on the shelf is particularly important. In addition to the environment, the load of the wooden plank has a lot to do with the way of placing objects on the plank. If the bearing area is reduced, the load of the wooden plank will be directly reduced, which is not the original load.